A Tri-Cree RGrB high power LED module to quickly and easily convert any neopixel saber with a pogo-pin blade connector into "in-hilt" RGB LED saber. Our converter module is currently the brightest and most reliable on the market thanks to the brightest high power Cree XP-E2 leds, specially designed heat sink and a driver pcb.
This module was developed from scratch in collaboration with our friends and partners from Warsabers.

Features:

• for 1 inch blade sockets

• large copper heat sink for efficient High Power LED cooling

• built-in 55 kOhm “Blade ID” resistor between Data and GND

• brightest binned Cree XP-E2 LEDs with Red/Green/RoyalBlue color configuration (any custom color configuration possible by request for extra charge)

• SCW copper core MCPCB with direct thermal path

• works as the 1st RGB pixel in the pixel strip, connected to the blade connector

• configured for 1000-1200mA drive per color (can be manually changed by customer if desired, will require removing the driver PCB, changing current limiting resistors and resoldering LED wires)

• ⌀25.3x20mm (-5mm in length if using with a Thin-Walled blade)

• works with both Thin-Walled and Thick-Walled, as well as 7/8 inch blades with a 1"-to-7/8" diameter adapter

• connection compatible with TCSS/SCW/KR hilt side pogo-pin PCBs (works with Vader's Vault, Genesis Custom Sabers, SaberTrio, SaberMach, Electrum Sabercrafts and other custom sabers)

How to use:

Brightness comparison with other similar modules on the market: