RGB NeoCree Converter LED Module
A Tri-Cree RGrB high power LED module to quickly and easily convert any neopixel saber with a pogo-pin blade connector into "in-hilt" RGB LED saber. Our converter module is currently the brightest and most reliable on the market thanks to the brightest high power Cree XP-E2 leds, specially designed heat sink and a driver pcb.
This module was developed from scratch in collaboration with our friends and partners from Warsabers.
Features:
-
for 1 inch blade sockets
-
large copper heat sink for efficient High Power LED cooling
-
built-in 55 kOhm “Blade ID” resistor between Data and GND
-
brightest binned Cree XP-E2 LEDs with Red/Green/RoyalBlue color configuration (any custom color configuration possible by request for extra charge)
-
SCW copper core MCPCB with direct thermal path
-
works as the 1st RGB pixel in the pixel strip, connected to the blade connector
-
configured for 1000-1200mA drive per color (can be manually changed by customer if desired, will require removing the driver PCB, changing current limiting resistors and resoldering LED wires)
-
⌀25.3x20mm (-5mm in length if using with a Thin-Walled blade)
-
works with both Thin-Walled and Thick-Walled, as well as 7/8 inch blades with a 1"-to-7/8" diameter adapter
-
connection compatible with TCSS/SCW/KR hilt side pogo-pin PCBs (works with Vader's Vault, Genesis Custom Sabers, SaberTrio, SaberMach, Electrum Sabercrafts and other custom sabers)
How to use:
Brightness comparison with other similar modules on the market: